The main purpose of PVC waterstop membrane

Applicable to all kinds of roof waterproofing in industrial and construction industry, basement, reservoirs, dams, road tunnels, railway tunnels, air-raid shelters, grain depots, garbage mills, waste water treatment and other architectural waterproofing projects.

Plastic floor PVC (PVC) membrane floor and PVC block floor two. Polyvinyl chloride (PVC) membrane floor is a polyvinyl chloride resin as the main raw material, adding appropriate additives, in the sheet-like continuous substrate, the coating process is made, with the substrate into the foam of the chlorine Vinyl coil flooring and PVC substrate with two compact PVC floor, the width of 1800mm, 2000mm, length of each roll 20m, 30m, the total thickness of 1.5mm, 2mm.

Polyvinyl chloride (PVC) membrane floor suitable for laying living room, bedroom ground (mid-range decoration), the material should choose excellent or first class products.

The required area of the coil floor can be calculated by multiplying the laying area by 1.10. If the width of the web floor is exactly the width of the room, a 2% loss can be considered. Coil floor can be retail, how much to buy how much, should be scrambling to be careful to avoid waste.

Polyvinyl chloride (PVC) block flooring is polyvinyl chloride (PVC) and its copolymer resin as the main raw material, adding fillers, plasticizers, stabilizers, colorants and other accessories, the calendering, extrusion or extrusion process And into, there are two kinds of single-layer and homogeneous composite. The specifications for the 300mm × 300mm, thickness 1.5mm.

Each floor area of 0.09, massive floor loss rate of 2%.

Coil floor is the wear-resistant layer rolled out on the tube in the outer packaging, the application of corrugated packaging. In each roll of packaging or each box should indicate the name, manufacturer name, production date, batch number, grade, color, quantity, weight and so on. In the transport process shall not be affected by the sun, rain. Indoor storage of air to circulation, drying, not less than 1m away from the heat source. Coil floor should be erected.