The First Acrylic Resin In The Main Agent

the first Acrylic Resin in the main agent
 1, in various forms.
  Various resins, curing agents, modifier systems can be adapted to a wide range of applications to the requirements of the form, ranging from very low viscosity to high melting solids. 2, easy to cure.
  Choose a variety of curing agent, Acrylic Resin system can be almost 0 ~ 180 ℃ temperature range curing. 3, strong adhesion.
  The presence of polar hydroxyl and ether linkages inherent in the molecular chain of the Acrylic Resin gives it a high adhesion to various substances. Acrylic Resin curing low shrinkage, the resulting internal stress is small, which also helps to improve the adhesion strength. 4, low shrinkage
2 The reaction of the Acrylic Resin and the curing agent used is carried out by a direct addition reaction or by ring-opening polymerization of an epoxy group in the resin molecule without the presence of water or other volatile by-products. They exhibit very low shrinkage (less than 2%) compared to unsaturated polyester resins and phenolic resins during curing. 5, mechanical properties.
  The cured Acrylic Resin system has excellent mechanical properties. 6, electrical performance.
  The cured Acrylic Resin system is an excellent insulating material with high dielectric properties, surface leakage resistance and arc resistance. 7, chemical stability.
  In general, the cured Acrylic Resin system has excellent alkali resistance, acid resistance and solvent resistance. Like other properties of the cured epoxy system, the chemical stability also depends on the resin and curing agent chosen. Appropriate use of Acrylic Resin and curing agent, can make it has a special chemical stability. 8, dimensional stability.
  The combination of many of the above properties makes the Acrylic Resin system with outstanding dimensional stability and durability. 9, resistant to mold.
  The cured Acrylic Resin system is resistant to most molds and can be used in harsh tropical conditions. (1) 100 epoxy grouting material, including A (resin, etc.), B (curing agent, etc.), C (filler aggregate, etc.) three components, can also be adjusted according to the specific use of formula, improve the process to meet Different requirements or highlight a part of the performance. Conventional use, the ingredients are completely mixed after the grouting operation.
Epoxy mortar coating in the epoxy mortar coating is the key step in the construction process, the construction will directly affect the quality of epoxy mortar floor quality
(1) batch of coarse quartz mortar layer: the first Acrylic Resin in the main agent to stir evenly, according to the proportion of the main agent and curing agent mixed, fully stirred evenly, the mixture will be curing agent from the main agent into the central barrel, Avoid uneven mixing of materials. After mixing, with the appropriate amount of 60 mesh -80 mesh rough quartz sand, scraper scraper process used to fill the flat surface.
(2) batches of fine quartz mortar layer: mixed in a good Acrylic Resin coated with the amount of 100 mesh-120 mesh fine quartz sand, the same batch of knife scraping, and further increase the resistance of the coating and impact resistance.
According to the design thickness of the floor can be repeatedly scraping repeated (1) (2) Road process, to be mortar in the coating after curing grinding, clean and clean.